Flange Yokes
Filters: PILOT DIAMETER = 1.811, | PART NUMBER | SERIES | PILOT TYPE | PILOT DIA. | BOLT CIRCLE DIA. | BOLT HOLE COUNT | BOLT HOLE DIA. | C/L TO FACE | SWING DIA. | JOINT ANGLE | NOTES | VEHICLE CLASS | BRAND |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
2-2-1679 |
1310 | M | 1.811 | 3.340 | 4 | 0.406 | 1.770 | 4.150 | 12 | Sq Bolt Pattern / Same as our part number 3102-15. This is used on Toyota truck applications. It is a 1310 version of our part number 1302-15. | LD | Spicer |
| 1302-15 |
1351-20 | M | 1.811 | 3.340 | 4 | 0.410 | 1.750 | 4.100 | Sq Bolt Pattern / Toyota Truck | LD | PTI | |
| 1302-16 |
1351-20 | M | 1.811 | 3.340 | 4 | 0.335 | 1.438 | 4.000 | Rec Bolt Pattern / Toyota Truck | LD | PTI | |
| 3102-15 |
1310 | M | 1.811 | 3.340 | 4 | 0.410 | 1.750 | 4.130 | Sq Bolt Pattern / Toyota Truck | LD | PTI | |
| 3102-16 |
1310 | M | 1.811 | 3.340 | 4 | 0.323 | 1.713 | 4.160 | Rec Bolt Pattern / Toyota Truck | LD | PTI | |
| 1302-17 |
1351-21 | M | 1.811 | 3.575 | 4 | 0.450 | 1.688 | 4.540 | Rec Bolt Pattern / Toyota Land Cruiser | LD | PTI | |
| 3102-17 |
1310 | M | 1.811 | 3.575 | 4 | 0.450 | 2.718 | 4.330 | Rec Bolt Pattern / Toyota Land Cruiser | LD | PTI | |
| 3102-18 |
1310 | M | 1.811 | 3.340 | 4 | 0.410 | 2.718 | 4.000 | Rec Bolt Pattern / Toyota Land Cruiser | LD | PTI | |
| 1302-37 |
1351 | M | 1.811 | 3.661 | 4 | 0.445 | 1.750 | 4.520 | Sq Bolt Pattern | LD | PTI | |
| 2302-23 |
2351-20 | M | 1.811 | 3.078 | 4 | 0.335 | 1.575 | 3.770 | Toyota Car, SQ Bolt Pattern | LD | PTI | |
| N2-2-2323 |
1210 | M | 1.811 | 3.062 | 4 | 0.323 | 1.500 | 3.812 | 20 | Toyota. Like 2302-23 but in 1210 | LD | Neapco |
| 3302-185 |
1330 | M | 1.811 | 3.661 | 4 | 0.482 | 1.625 | 4.528 | Square Bolt Pattern / Fits Toyota applicatons |
LD | PTI | |
| 3102-185 |
1310 | M | 1.811 | 3.661 | 4 | 0.445 | 1.634 | 4.330 | Square Bolt Pattern / Fits Toyota applicatons |
LD | PTI | |
| 2-2-02768 |
1330 | M | 1.811 | 3.674 | 4 | 0.482 | 1.653 | 5.118 | Replaced 5002768 | LD | Spicer | |
| 3102-187 |
1310 | M | 1.811 | 3.078 | 4 | 0.335 | 1.750 | 4.140 | Toyota Car / 1310 version of 2302-23, Square 8mm holes | LD | PTI | |
| 3502-188 |
1350 | M | 1.811 | 4.872 | 4 | 0.484 | 1.875 | 5.820 | Same as Dana 5004010 (Proprietary to Toyota), Square | LD | PTI | |
| 3102-188 |
1310 | M | 1.811 | 3.078 | 4 | 0.402 | 1.687 | 4.140 | 0 | Square pattern, Toyota Car / 1310 version of 2302-23 with 10mm bolt holes | LD | PTI |
| 1202-181 |
1251 | M | 1.811 | 3.200 | 4 | 0.400 | 1.625 | 4.000 | 2015 & up Nissan Murano, square | LD | PTI |
